laipower/wp-content/plugins/wp-webauthn/wp-webauthn-vendor/thecodingmachine/safe/generated/curl.php

3157 lines
68 KiB
PHP
Raw Normal View History

<?php
namespace Safe;
use Safe\Exceptions\CurlException;
/**
* This function URL encodes the given string according to RFC 3986.
*
* @param resource $ch A cURL handle returned by
* curl_init.
* @param string $str The string to be encoded.
* @return string Returns escaped string.
* @throws CurlException
*
*/
function curl_escape($ch, string $str): string
{
error_clear_last();
$result = \curl_escape($ch, $str);
if ($result === false) {
throw CurlException::createFromCurlResource($ch);
}
return $result;
}
/**
* Execute the given cURL session.
*
* This function should be called after initializing a cURL session and all
* the options for the session are set.
*
* @param resource $ch A cURL handle returned by
* curl_init.
* @return bool|string Returns TRUE on success. However, if the CURLOPT_RETURNTRANSFER
* option is set, it will return
* the result on success, FALSE on failure.
* @throws CurlException
*
*/
function curl_exec($ch)
{
error_clear_last();
$result = \curl_exec($ch);
if ($result === false) {
throw CurlException::createFromCurlResource($ch);
}
return $result;
}
/**
* Gets information about the last transfer.
*
* @param resource $ch A cURL handle returned by
* curl_init.
* @param int $opt This may be one of the following constants:
*
*
*
* CURLINFO_EFFECTIVE_URL - Last effective URL
*
*
*
*
* CURLINFO_HTTP_CODE - The last response code.
* As of PHP 5.5.0 and cURL 7.10.8, this is a legacy alias of
* CURLINFO_RESPONSE_CODE
*
*
*
*
* CURLINFO_FILETIME - Remote time of the retrieved document, with the CURLOPT_FILETIME enabled; if -1 is returned the time of the document is unknown
*
*
*
*
* CURLINFO_TOTAL_TIME - Total transaction time in seconds for last transfer
*
*
*
*
* CURLINFO_NAMELOOKUP_TIME - Time in seconds until name resolving was complete
*
*
*
*
* CURLINFO_CONNECT_TIME - Time in seconds it took to establish the connection
*
*
*
*
* CURLINFO_PRETRANSFER_TIME - Time in seconds from start until just before file transfer begins
*
*
*
*
* CURLINFO_STARTTRANSFER_TIME - Time in seconds until the first byte is about to be transferred
*
*
*
*
* CURLINFO_REDIRECT_COUNT - Number of redirects, with the CURLOPT_FOLLOWLOCATION option enabled
*
*
*
*
* CURLINFO_REDIRECT_TIME - Time in seconds of all redirection steps before final transaction was started, with the CURLOPT_FOLLOWLOCATION option enabled
*
*
*
*
* CURLINFO_REDIRECT_URL - With the CURLOPT_FOLLOWLOCATION option disabled: redirect URL found in the last transaction, that should be requested manually next. With the CURLOPT_FOLLOWLOCATION option enabled: this is empty. The redirect URL in this case is available in CURLINFO_EFFECTIVE_URL
*
*
*
*
* CURLINFO_PRIMARY_IP - IP address of the most recent connection
*
*
*
*
* CURLINFO_PRIMARY_PORT - Destination port of the most recent connection
*
*
*
*
* CURLINFO_LOCAL_IP - Local (source) IP address of the most recent connection
*
*
*
*
* CURLINFO_LOCAL_PORT - Local (source) port of the most recent connection
*
*
*
*
* CURLINFO_SIZE_UPLOAD - Total number of bytes uploaded
*
*
*
*
* CURLINFO_SIZE_DOWNLOAD - Total number of bytes downloaded
*
*
*
*
* CURLINFO_SPEED_DOWNLOAD - Average download speed
*
*
*
*
* CURLINFO_SPEED_UPLOAD - Average upload speed
*
*
*
*
* CURLINFO_HEADER_SIZE - Total size of all headers received
*
*
*
*
* CURLINFO_HEADER_OUT - The request string sent. For this to
* work, add the CURLINFO_HEADER_OUT option to the handle by calling
* curl_setopt
*
*
*
*
* CURLINFO_REQUEST_SIZE - Total size of issued requests, currently only for HTTP requests
*
*
*
*
* CURLINFO_SSL_VERIFYRESULT - Result of SSL certification verification requested by setting CURLOPT_SSL_VERIFYPEER
*
*
*
*
* CURLINFO_CONTENT_LENGTH_DOWNLOAD - Content length of download, read from Content-Length: field
*
*
*
*
* CURLINFO_CONTENT_LENGTH_UPLOAD - Specified size of upload
*
*
*
*
* CURLINFO_CONTENT_TYPE - Content-Type: of the requested document. NULL indicates server did not send valid Content-Type: header
*
*
*
*
* CURLINFO_PRIVATE - Private data associated with this cURL handle, previously set with the CURLOPT_PRIVATE option of curl_setopt
*
*
*
*
* CURLINFO_RESPONSE_CODE - The last response code
*
*
*
*
* CURLINFO_HTTP_CONNECTCODE - The CONNECT response code
*
*
*
*
* CURLINFO_HTTPAUTH_AVAIL - Bitmask indicating the authentication method(s) available according to the previous response
*
*
*
*
* CURLINFO_PROXYAUTH_AVAIL - Bitmask indicating the proxy authentication method(s) available according to the previous response
*
*
*
*
* CURLINFO_OS_ERRNO - Errno from a connect failure. The number is OS and system specific.
*
*
*
*
* CURLINFO_NUM_CONNECTS - Number of connections curl had to create to achieve the previous transfer
*
*
*
*
* CURLINFO_SSL_ENGINES - OpenSSL crypto-engines supported
*
*
*
*
* CURLINFO_COOKIELIST - All known cookies
*
*
*
*
* CURLINFO_FTP_ENTRY_PATH - Entry path in FTP server
*
*
*
*
* CURLINFO_APPCONNECT_TIME - Time in seconds it took from the start until the SSL/SSH connect/handshake to the remote host was completed
*
*
*
*
* CURLINFO_CERTINFO - TLS certificate chain
*
*
*
*
* CURLINFO_CONDITION_UNMET - Info on unmet time conditional
*
*
*
*
* CURLINFO_RTSP_CLIENT_CSEQ - Next RTSP client CSeq
*
*
*
*
* CURLINFO_RTSP_CSEQ_RECV - Recently received CSeq
*
*
*
*
* CURLINFO_RTSP_SERVER_CSEQ - Next RTSP server CSeq
*
*
*
*
* CURLINFO_RTSP_SESSION_ID - RTSP session ID
*
*
*
*
* CURLINFO_CONTENT_LENGTH_DOWNLOAD_T - The content-length of the download. This is the value read from the Content-Type: field. -1 if the size isn't known
*
*
*
*
* CURLINFO_CONTENT_LENGTH_UPLOAD_T - The specified size of the upload. -1 if the size isn't known
*
*
*
*
* CURLINFO_HTTP_VERSION - The version used in the last HTTP connection. The return value will be one of the defined CURL_HTTP_VERSION_* constants or 0 if the version can't be determined
*
*
*
*
* CURLINFO_PROTOCOL - The protocol used in the last HTTP connection. The returned value will be exactly one of the CURLPROTO_* values
*
*
*
*
* CURLINFO_PROXY_SSL_VERIFYRESULT - The result of the certificate verification that was requested (using the CURLOPT_PROXY_SSL_VERIFYPEER option). Only used for HTTPS proxies
*
*
*
*
* CURLINFO_SCHEME - The URL scheme used for the most recent connection
*
*
*
*
* CURLINFO_SIZE_DOWNLOAD_T - Total number of bytes that were downloaded. The number is only for the latest transfer and will be reset again for each new transfer
*
*
*
*
* CURLINFO_SIZE_UPLOAD_T - Total number of bytes that were uploaded
*
*
*
*
* CURLINFO_SPEED_DOWNLOAD_T - The average download speed in bytes/second that curl measured for the complete download
*
*
*
*
* CURLINFO_SPEED_UPLOAD_T - The average upload speed in bytes/second that curl measured for the complete upload
*
*
*
*
* CURLINFO_APPCONNECT_TIME_T - Time, in microseconds, it took from the start until the SSL/SSH connect/handshake to the remote host was completed
*
*
*
*
* CURLINFO_CONNECT_TIME_T - Total time taken, in microseconds, from the start until the connection to the remote host (or proxy) was completed
*
*
*
*
* CURLINFO_FILETIME_T - Remote time of the retrieved document (as Unix timestamp), an alternative to CURLINFO_FILETIME to allow systems with 32 bit long variables to extract dates outside of the 32bit timestamp range
*
*
*
*
* CURLINFO_NAMELOOKUP_TIME_T - Time in microseconds from the start until the name resolving was completed
*
*
*
*
* CURLINFO_PRETRANSFER_TIME_T - Time taken from the start until the file transfer is just about to begin, in microseconds
*
*
*
*
* CURLINFO_REDIRECT_TIME_T - Total time, in microseconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before final transaction was started
*
*
*
*
* CURLINFO_STARTTRANSFER_TIME_T - Time, in microseconds, it took from the start until the first byte is received
*
*
*
*
* CURLINFO_TOTAL_TIME_T - Total time in microseconds for the previous transfer, including name resolving, TCP connect etc.
*
*
*
* @return mixed If opt is given, returns its value.
* Otherwise, returns an associative array with the following elements
* (which correspond to opt):
*
*
*
* "url"
*
*
*
*
* "content_type"
*
*
*
*
* "http_code"
*
*
*
*
* "header_size"
*
*
*
*
* "request_size"
*
*
*
*
* "filetime"
*
*
*
*
* "ssl_verify_result"
*
*
*
*
* "redirect_count"
*
*
*
*
* "total_time"
*
*
*
*
* "namelookup_time"
*
*
*
*
* "connect_time"
*
*
*
*
* "pretransfer_time"
*
*
*
*
* "size_upload"
*
*
*
*
* "size_download"
*
*
*
*
* "speed_download"
*
*
*
*
* "speed_upload"
*
*
*
*
* "download_content_length"
*
*
*
*
* "upload_content_length"
*
*
*
*
* "starttransfer_time"
*
*
*
*
* "redirect_time"
*
*
*
*
* "certinfo"
*
*
*
*
* "primary_ip"
*
*
*
*
* "primary_port"
*
*
*
*
* "local_ip"
*
*
*
*
* "local_port"
*
*
*
*
* "redirect_url"
*
*
*
*
* "request_header" (This is only set if the CURLINFO_HEADER_OUT
* is set by a previous call to curl_setopt)
*
*
*
* Note that private data is not included in the associative array and must be retrieved individually with the CURLINFO_PRIVATE option.
* @throws CurlException
*
*/
function curl_getinfo($ch, int $opt = null)
{
error_clear_last();
if ($opt !== null) {
$result = \curl_getinfo($ch, $opt);
} else {
$result = \curl_getinfo($ch);
}
if ($result === false) {
throw CurlException::createFromCurlResource($ch);
}
return $result;
}
/**
* Initializes a new session and return a cURL handle for use with the
* curl_setopt, curl_exec,
* and curl_close functions.
*
* @param string $url If provided, the CURLOPT_URL option will be set
* to its value. You can manually set this using the
* curl_setopt function.
*
* The file protocol is disabled by cURL if
* open_basedir is set.
* @return resource Returns a cURL handle on success, FALSE on errors.
* @throws CurlException
*
*/
function curl_init(string $url = null)
{
error_clear_last();
$result = \curl_init($url);
if ($result === false) {
throw CurlException::createFromPhpError();
}
return $result;
}
/**
* Return an integer containing the last multi curl error number.
*
* @param resource $mh A cURL multi handle returned by
* curl_multi_init.
* @return int Return an integer containing the last multi curl error number.
* @throws CurlException
*
*/
function curl_multi_errno($mh): int
{
error_clear_last();
$result = \curl_multi_errno($mh);
if ($result === false) {
throw CurlException::createFromPhpError();
}
return $result;
}
/**
* Ask the multi handle if there are any messages or information from the individual transfers.
* Messages may include information such as an error code from the transfer or just the fact
* that a transfer is completed.
*
* Repeated calls to this function will return a new result each time, until a FALSE is returned
* as a signal that there is no more to get at this point. The integer pointed to with
* msgs_in_queue will contain the number of remaining messages after this
* function was called.
*
* @param resource $mh A cURL multi handle returned by
* curl_multi_init.
* @param int|null $msgs_in_queue Number of messages that are still in the queue
* @return array On success, returns an associative array for the message, FALSE on failure.
*
*
* Contents of the returned array
*
*
*
* Key:
* Value:
*
*
*
*
* msg
* The CURLMSG_DONE constant. Other return values
* are currently not available.
*
*
* result
* One of the CURLE_* constants. If everything is
* OK, the CURLE_OK will be the result.
*
*
* handle
* Resource of type curl indicates the handle which it concerns.
*
*
*
*
* @throws CurlException
*
*/
function curl_multi_info_read($mh, ?int &$msgs_in_queue = null): array
{
error_clear_last();
$result = \curl_multi_info_read($mh, $msgs_in_queue);
if ($result === false) {
throw CurlException::createFromPhpError();
}
return $result;
}
/**
* Allows the processing of multiple cURL handles asynchronously.
*
* @return resource Returns a cURL multi handle resource on success, FALSE on failure.
* @throws CurlException
*
*/
function curl_multi_init()
{
error_clear_last();
$result = \curl_multi_init();
if ($result === false) {
throw CurlException::createFromPhpError();
}
return $result;
}
/**
* Sets an option on the given cURL session handle.
*
* @param resource $ch A cURL handle returned by
* curl_init.
* @param int $option The CURLOPT_XXX option to set.
* @param mixed $value The value to be set on option.
*
* value should be a bool for the
* following values of the option parameter:
*
*
*
*
* Option
* Set value to
* Notes
*
*
*
*
* CURLOPT_AUTOREFERER
*
* TRUE to automatically set the Referer: field in
* requests where it follows a Location: redirect.
*
*
*
*
*
* CURLOPT_BINARYTRANSFER
*
* TRUE to return the raw output when
* CURLOPT_RETURNTRANSFER is used.
*
*
* From PHP 5.1.3, this option has no effect: the raw output will
* always be returned when
* CURLOPT_RETURNTRANSFER is used.
*
*
*
* CURLOPT_COOKIESESSION
*
* TRUE to mark this as a new cookie "session". It will force libcurl
* to ignore all cookies it is about to load that are "session cookies"
* from the previous session. By default, libcurl always stores and
* loads all cookies, independent if they are session cookies or not.
* Session cookies are cookies without expiry date and they are meant
* to be alive and existing for this "session" only.
*
*
*
*
*
* CURLOPT_CERTINFO
*
* TRUE to output SSL certification information to STDERR
* on secure transfers.
*
*
* Added in cURL 7.19.1.
* Available since PHP 5.3.2.
* Requires CURLOPT_VERBOSE to be on to have an effect.
*
*
*
* CURLOPT_CONNECT_ONLY
*
* TRUE tells the library to perform all the required proxy authentication
* and connection setup, but no data transfer. This option is implemented for
* HTTP, SMTP and POP3.
*
*
* Added in 7.15.2.
* Available since PHP 5.5.0.
*
*
*
* CURLOPT_CRLF
*
* TRUE to convert Unix newlines to CRLF newlines
* on transfers.
*
*
*
*
*
* CURLOPT_DISALLOW_USERNAME_IN_URL
*
* TRUE to not allow URLs that include a username. Usernames are allowed by default (0).
*
*
* Added in cURL 7.61.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_DNS_SHUFFLE_ADDRESSES
*
* TRUE to shuffle the order of all returned addresses so that they will be used
* in a random order, when a name is resolved and more than one IP address is returned.
* This may cause IPv4 to be used before IPv6 or vice versa.
*
*
* Added in cURL 7.60.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_HAPROXYPROTOCOL
*
* TRUE to send an HAProxy PROXY protocol v1 header at the start of the connection.
* The default action is not to send this header.
*
*
* Added in cURL 7.60.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_SSH_COMPRESSION
*
* TRUE to enable built-in SSH compression. This is a request, not an order;
* the server may or may not do it.
*
*
* Added in cURL 7.56.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_DNS_USE_GLOBAL_CACHE
*
* TRUE to use a global DNS cache. This option is not thread-safe.
* It is conditionally enabled by default if PHP is built for non-threaded use
* (CLI, FCGI, Apache2-Prefork, etc.).
*
*
*
*
*
* CURLOPT_FAILONERROR
*
* TRUE to fail verbosely if the HTTP code returned
* is greater than or equal to 400. The default behavior is to return
* the page normally, ignoring the code.
*
*
*
*
*
* CURLOPT_SSL_FALSESTART
*
* TRUE to enable TLS false start.
*
*
* Added in cURL 7.42.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_FILETIME
*
* TRUE to attempt to retrieve the modification
* date of the remote document. This value can be retrieved using
* the CURLINFO_FILETIME option with
* curl_getinfo.
*
*
*
*
*
* CURLOPT_FOLLOWLOCATION
*
* TRUE to follow any
* "Location: " header that the server sends as
* part of the HTTP header (note this is recursive, PHP will follow as
* many "Location: " headers that it is sent,
* unless CURLOPT_MAXREDIRS is set).
*
*
*
*
*
* CURLOPT_FORBID_REUSE
*
* TRUE to force the connection to explicitly
* close when it has finished processing, and not be pooled for reuse.
*
*
*
*
*
* CURLOPT_FRESH_CONNECT
*
* TRUE to force the use of a new connection
* instead of a cached one.
*
*
*
*
*
* CURLOPT_FTP_USE_EPRT
*
* TRUE to use EPRT (and LPRT) when doing active
* FTP downloads. Use FALSE to disable EPRT and LPRT and use PORT
* only.
*
*
*
*
*
* CURLOPT_FTP_USE_EPSV
*
* TRUE to first try an EPSV command for FTP
* transfers before reverting back to PASV. Set to FALSE
* to disable EPSV.
*
*
*
*
*
* CURLOPT_FTP_CREATE_MISSING_DIRS
*
* TRUE to create missing directories when an FTP operation
* encounters a path that currently doesn't exist.
*
*
*
*
*
* CURLOPT_FTPAPPEND
*
* TRUE to append to the remote file instead of
* overwriting it.
*
*
*
*
*
* CURLOPT_TCP_NODELAY
*
* TRUE to disable TCP's Nagle algorithm, which tries to minimize
* the number of small packets on the network.
*
*
* Available since PHP 5.2.1 for versions compiled with libcurl 7.11.2 or
* greater.
*
*
*
* CURLOPT_FTPASCII
*
* An alias of
* CURLOPT_TRANSFERTEXT. Use that instead.
*
*
*
*
*
* CURLOPT_FTPLISTONLY
*
* TRUE to only list the names of an FTP
* directory.
*
*
*
*
*
* CURLOPT_HEADER
*
* TRUE to include the header in the output.
*
*
*
*
*
* CURLINFO_HEADER_OUT
*
* TRUE to track the handle's request string.
*
*
* Available since PHP 5.1.3. The CURLINFO_
* prefix is intentional.
*
*
*
* CURLOPT_HTTP09_ALLOWED
*
* Whether to allow HTTP/0.9 responses. Defaults to FALSE as of libcurl 7.66.0;
* formerly it defaulted to TRUE.
*
*
* Available since PHP 7.3.15 and 7.4.3, respectively, if built against libcurl &gt;= 7.64.0
*
*
*
* CURLOPT_HTTPGET
*
* TRUE to reset the HTTP request method to GET.
* Since GET is the default, this is only necessary if the request
* method has been changed.
*
*
*
*
*
* CURLOPT_HTTPPROXYTUNNEL
*
* TRUE to tunnel through a given HTTP proxy.
*
*
*
*
*
* CURLOPT_HTTP_CONTENT_DECODING
*
* FALSE to get the raw HTTP response body.
*
*
* Available as of PHP 5.5.0 if built against libcurl &gt;= 7.16.2.
*
*
*
* CURLOPT_KEEP_SENDING_ON_ERROR
*
* TRUE to keep sending the request body if the HTTP code returned is
* equal to or larger than 300. The default action would be to stop sending
* and close the stream or connection. Suitable for manual NTLM authentication.
* Most applications do not need this option.
*
*
* Available as of PHP 7.3.0 if built against libcurl &gt;= 7.51.0.
*
*
*
* CURLOPT_MUTE
*
* TRUE to be completely silent with regards to
* the cURL functions.
*
*
* Removed in cURL 7.15.5 (You can use CURLOPT_RETURNTRANSFER instead)
*
*
*
* CURLOPT_NETRC
*
* TRUE to scan the ~/.netrc
* file to find a username and password for the remote site that
* a connection is being established with.
*
*
*
*
*
* CURLOPT_NOBODY
*
* TRUE to exclude the body from the output.
* Request method is then set to HEAD. Changing this to FALSE does
* not change it to GET.
*
*
*
*
*
* CURLOPT_NOPROGRESS
*
* TRUE to disable the progress meter for cURL transfers.
*
*
* PHP automatically sets this option to TRUE, this should only be
* changed for debugging purposes.
*
*
*
*
*
*
*
* CURLOPT_NOSIGNAL
*
* TRUE to ignore any cURL function that causes a
* signal to be sent to the PHP process. This is turned on by default
* in multi-threaded SAPIs so timeout options can still be used.
*
*
* Added in cURL 7.10.
*
*
*
* CURLOPT_PATH_AS_IS
*
* TRUE to not handle dot dot sequences.
*
*
* Added in cURL 7.42.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_PIPEWAIT
*
* TRUE to wait for pipelining/multiplexing.
*
*
* Added in cURL 7.43.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_POST
*
* TRUE to do a regular HTTP POST. This POST is the
* normal application/x-www-form-urlencoded kind,
* most commonly used by HTML forms.
*
*
*
*
*
* CURLOPT_PUT
*
* TRUE to HTTP PUT a file. The file to PUT must
* be set with CURLOPT_INFILE and
* CURLOPT_INFILESIZE.
*
*
*
*
*
* CURLOPT_RETURNTRANSFER
*
* TRUE to return the transfer as a string of the
* return value of curl_exec instead of outputting
* it directly.
*
*
*
*
*
* CURLOPT_SAFE_UPLOAD
*
* TRUE to disable support for the @ prefix for
* uploading files in CURLOPT_POSTFIELDS, which
* means that values starting with @ can be safely
* passed as fields. CURLFile may be used for
* uploads instead.
*
*
* Added in PHP 5.5.0 with FALSE as the default value. PHP 5.6.0
* changes the default value to TRUE. PHP 7 removes this option;
* the CURLFile interface must be used to upload files.
*
*
*
* CURLOPT_SASL_IR
*
* TRUE to enable sending the initial response in the first packet.
*
*
* Added in cURL 7.31.10. Available since PHP 7.0.7.
*
*
*
* CURLOPT_SSL_ENABLE_ALPN
*
* FALSE to disable ALPN in the SSL handshake (if the SSL backend
* libcurl is built to use supports it), which can be used to
* negotiate http2.
*
*
* Added in cURL 7.36.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_SSL_ENABLE_NPN
*
* FALSE to disable NPN in the SSL handshake (if the SSL backend
* libcurl is built to use supports it), which can be used to
* negotiate http2.
*
*
* Added in cURL 7.36.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_SSL_VERIFYPEER
*
* FALSE to stop cURL from verifying the peer's
* certificate. Alternate certificates to verify against can be
* specified with the CURLOPT_CAINFO option
* or a certificate directory can be specified with the
* CURLOPT_CAPATH option.
*
*
* TRUE by default as of cURL 7.10. Default bundle installed as of
* cURL 7.10.
*
*
*
* CURLOPT_SSL_VERIFYSTATUS
*
* TRUE to verify the certificate's status.
*
*
* Added in cURL 7.41.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_PROXY_SSL_VERIFYPEER
*
* FALSE to stop cURL from verifying the peer's certificate.
* Alternate certificates to verify against can be
* specified with the CURLOPT_CAINFO option
* or a certificate directory can be specified with the
* CURLOPT_CAPATH option.
* When set to false, the peer certificate verification succeeds regardless.
*
*
* TRUE by default. Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_SUPPRESS_CONNECT_HEADERS
*
* TRUE to suppress proxy CONNECT response headers from the user callback functions
* CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION,
* when CURLOPT_HTTPPROXYTUNNEL is used and a CONNECT request is made.
*
*
* Added in cURL 7.54.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_TCP_FASTOPEN
*
* TRUE to enable TCP Fast Open.
*
*
* Added in cURL 7.49.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_TFTP_NO_OPTIONS
*
* TRUE to not send TFTP options requests.
*
*
* Added in cURL 7.48.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_TRANSFERTEXT
*
* TRUE to use ASCII mode for FTP transfers.
* For LDAP, it retrieves data in plain text instead of HTML. On
* Windows systems, it will not set STDOUT to binary
* mode.
*
*
*
*
*
* CURLOPT_UNRESTRICTED_AUTH
*
* TRUE to keep sending the username and password
* when following locations (using
* CURLOPT_FOLLOWLOCATION), even when the
* hostname has changed.
*
*
*
*
*
* CURLOPT_UPLOAD
*
* TRUE to prepare for an upload.
*
*
*
*
*
* CURLOPT_VERBOSE
*
* TRUE to output verbose information. Writes
* output to STDERR, or the file specified using
* CURLOPT_STDERR.
*
*
*
*
*
*
*
*
* TRUE to disable the progress meter for cURL transfers.
*
*
* PHP automatically sets this option to TRUE, this should only be
* changed for debugging purposes.
*
*
*
* PHP automatically sets this option to TRUE, this should only be
* changed for debugging purposes.
*
* value should be an integer for the
* following values of the option parameter:
*
*
*
*
* Option
* Set value to
* Notes
*
*
*
*
* CURLOPT_BUFFERSIZE
*
* The size of the buffer to use for each read. There is no guarantee
* this request will be fulfilled, however.
*
*
* Added in cURL 7.10.
*
*
*
* CURLOPT_CLOSEPOLICY
*
* One of the CURLCLOSEPOLICY_* values.
*
*
* This option is deprecated, as it was never implemented in cURL and
* never had any effect.
*
*
*
*
* Removed in PHP 5.6.0.
*
*
*
* CURLOPT_CONNECTTIMEOUT
*
* The number of seconds to wait while trying to connect. Use 0 to
* wait indefinitely.
*
*
*
*
*
* CURLOPT_CONNECTTIMEOUT_MS
*
* The number of milliseconds to wait while trying to connect. Use 0 to
* wait indefinitely.
*
* If libcurl is built to use the standard system name resolver, that
* portion of the connect will still use full-second resolution for
* timeouts with a minimum timeout allowed of one second.
*
*
* Added in cURL 7.16.2. Available since PHP 5.2.3.
*
*
*
* CURLOPT_DNS_CACHE_TIMEOUT
*
* The number of seconds to keep DNS entries in memory. This
* option is set to 120 (2 minutes) by default.
*
*
*
*
*
* CURLOPT_EXPECT_100_TIMEOUT_MS
*
* The timeout for Expect: 100-continue responses in milliseconds.
* Defaults to 1000 milliseconds.
*
*
* Added in cURL 7.36.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS
*
* Head start for ipv6 for the happy eyeballs algorithm. Happy eyeballs attempts
* to connect to both IPv4 and IPv6 addresses for dual-stack hosts,
* preferring IPv6 first for timeout milliseconds.
* Defaults to CURL_HET_DEFAULT, which is currently 200 milliseconds.
*
*
* Added in cURL 7.59.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_FTPSSLAUTH
*
* The FTP authentication method (when is activated):
* CURLFTPAUTH_SSL (try SSL first),
* CURLFTPAUTH_TLS (try TLS first), or
* CURLFTPAUTH_DEFAULT (let cURL decide).
*
*
* Added in cURL 7.12.2.
*
*
*
* CURLOPT_HEADEROPT
*
* How to deal with headers. One of the following constants:
*
* CURLHEADER_UNIFIED: the headers specified in
* CURLOPT_HTTPHEADER will be used in requests
* both to servers and proxies. With this option enabled,
* CURLOPT_PROXYHEADER will not have any effect.
*
*
* CURLHEADER_SEPARATE: makes
* CURLOPT_HTTPHEADER headers only get sent to
* a server and not to a proxy. Proxy headers must be set with
* CURLOPT_PROXYHEADER to get used. Note that if
* a non-CONNECT request is sent to a proxy, libcurl will send both
* server headers and proxy headers. When doing CONNECT, libcurl will
* send CURLOPT_PROXYHEADER headers only to the
* proxy and then CURLOPT_HTTPHEADER headers
* only to the server.
*
*
* Defaults to CURLHEADER_SEPARATE as of cURL
* 7.42.1, and CURLHEADER_UNIFIED before.
*
*
*
* Added in cURL 7.37.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_HTTP_VERSION
*
* CURL_HTTP_VERSION_NONE (default, lets CURL
* decide which version to use),
* CURL_HTTP_VERSION_1_0 (forces HTTP/1.0),
* CURL_HTTP_VERSION_1_1 (forces HTTP/1.1),
* CURL_HTTP_VERSION_2_0 (attempts HTTP 2),
* CURL_HTTP_VERSION_2 (alias of CURL_HTTP_VERSION_2_0),
* CURL_HTTP_VERSION_2TLS (attempts HTTP 2 over TLS (HTTPS) only) or
* CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE (issues non-TLS HTTP requests using HTTP/2 without HTTP/1.1 Upgrade).
*
*
*
*
*
* CURLOPT_HTTPAUTH
*
*
* The HTTP authentication method(s) to use. The options are:
* CURLAUTH_BASIC,
* CURLAUTH_DIGEST,
* CURLAUTH_GSSNEGOTIATE,
* CURLAUTH_NTLM,
* CURLAUTH_ANY, and
* CURLAUTH_ANYSAFE.
*
*
* The bitwise | (or) operator can be used to combine
* more than one method. If this is done, cURL will poll the server to see
* what methods it supports and pick the best one.
*
*
* CURLAUTH_ANY is an alias for
* CURLAUTH_BASIC | CURLAUTH_DIGEST | CURLAUTH_GSSNEGOTIATE | CURLAUTH_NTLM.
*
*
* CURLAUTH_ANYSAFE is an alias for
* CURLAUTH_DIGEST | CURLAUTH_GSSNEGOTIATE | CURLAUTH_NTLM.
*
*
*
*
*
*
* CURLOPT_INFILESIZE
*
* The expected size, in bytes, of the file when uploading a file to
* a remote site. Note that using this option will not stop libcurl
* from sending more data, as exactly what is sent depends on
* CURLOPT_READFUNCTION.
*
*
*
*
*
* CURLOPT_LOW_SPEED_LIMIT
*
* The transfer speed, in bytes per second, that the transfer should be
* below during the count of CURLOPT_LOW_SPEED_TIME
* seconds before PHP considers the transfer too slow and aborts.
*
*
*
*
*
* CURLOPT_LOW_SPEED_TIME
*
* The number of seconds the transfer speed should be below
* CURLOPT_LOW_SPEED_LIMIT before PHP considers
* the transfer too slow and aborts.
*
*
*
*
*
* CURLOPT_MAXCONNECTS
*
* The maximum amount of persistent connections that are allowed.
* When the limit is reached,
* CURLOPT_CLOSEPOLICY is used to determine
* which connection to close.
*
*
*
*
*
* CURLOPT_MAXREDIRS
*
* The maximum amount of HTTP redirections to follow. Use this option
* alongside CURLOPT_FOLLOWLOCATION.
*
*
*
*
*
* CURLOPT_PORT
*
* An alternative port number to connect to.
*
*
*
*
*
* CURLOPT_POSTREDIR
*
* A bitmask of 1 (301 Moved Permanently), 2 (302 Found)
* and 4 (303 See Other) if the HTTP POST method should be maintained
* when CURLOPT_FOLLOWLOCATION is set and a
* specific type of redirect occurs.
*
*
* Added in cURL 7.19.1. Available since PHP 5.3.2.
*
*
*
* CURLOPT_PROTOCOLS
*
*
* Bitmask of CURLPROTO_* values. If used, this bitmask
* limits what protocols libcurl may use in the transfer. This allows you to have
* a libcurl built to support a wide range of protocols but still limit specific
* transfers to only be allowed to use a subset of them. By default libcurl will
* accept all protocols it supports.
* See also CURLOPT_REDIR_PROTOCOLS.
*
*
* Valid protocol options are:
* CURLPROTO_HTTP,
* CURLPROTO_HTTPS,
* CURLPROTO_FTP,
* CURLPROTO_FTPS,
* CURLPROTO_SCP,
* CURLPROTO_SFTP,
* CURLPROTO_TELNET,
* CURLPROTO_LDAP,
* CURLPROTO_LDAPS,
* CURLPROTO_DICT,
* CURLPROTO_FILE,
* CURLPROTO_TFTP,
* CURLPROTO_ALL
*
*
*
* Added in cURL 7.19.4.
*
*
*
* CURLOPT_PROXYAUTH
*
* The HTTP authentication method(s) to use for the proxy connection.
* Use the same bitmasks as described in
* CURLOPT_HTTPAUTH. For proxy authentication,
* only CURLAUTH_BASIC and
* CURLAUTH_NTLM are currently supported.
*
*
* Added in cURL 7.10.7.
*
*
*
* CURLOPT_PROXYPORT
*
* The port number of the proxy to connect to. This port number can
* also be set in CURLOPT_PROXY.
*
*
*
*
*
* CURLOPT_PROXYTYPE
*
* Either CURLPROXY_HTTP (default),
* CURLPROXY_SOCKS4,
* CURLPROXY_SOCKS5,
* CURLPROXY_SOCKS4A or
* CURLPROXY_SOCKS5_HOSTNAME.
*
*
* Added in cURL 7.10.
*
*
*
* CURLOPT_REDIR_PROTOCOLS
*
* Bitmask of CURLPROTO_* values. If used, this bitmask
* limits what protocols libcurl may use in a transfer that it follows to in
* a redirect when CURLOPT_FOLLOWLOCATION is enabled.
* This allows you to limit specific transfers to only be allowed to use a subset
* of protocols in redirections. By default libcurl will allow all protocols
* except for FILE and SCP. This is a difference compared to pre-7.19.4 versions
* which unconditionally would follow to all protocols supported.
* See also CURLOPT_PROTOCOLS for protocol constant values.
*
*
* Added in cURL 7.19.4.
*
*
*
* CURLOPT_RESUME_FROM
*
* The offset, in bytes, to resume a transfer from.
*
*
*
*
*
* CURLOPT_SOCKS5_AUTH
*
*
* The SOCKS5 authentication method(s) to use. The options are:
* CURLAUTH_BASIC,
* CURLAUTH_GSSAPI,
* CURLAUTH_NONE.
*
*
* The bitwise | (or) operator can be used to combine
* more than one method. If this is done, cURL will poll the server to see
* what methods it supports and pick the best one.
*
*
* CURLAUTH_BASIC allows username/password authentication.
*
*
* CURLAUTH_GSSAPI allows GSS-API authentication.
*
*
* CURLAUTH_NONE allows no authentication.
*
*
* Defaults to CURLAUTH_BASIC|CURLAUTH_GSSAPI.
* Set the actual username and password with the CURLOPT_PROXYUSERPWD option.
*
*
*
* Available as of 7.3.0 and curl &gt;= 7.55.0.
*
*
*
* CURLOPT_SSL_OPTIONS
*
* Set SSL behavior options, which is a bitmask of any of the following constants:
*
* CURLSSLOPT_ALLOW_BEAST: do not attempt to use
* any workarounds for a security flaw in the SSL3 and TLS1.0 protocols.
*
*
* CURLSSLOPT_NO_REVOKE: disable certificate
* revocation checks for those SSL backends where such behavior is
* present.
*
*
*
* Added in cURL 7.25.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_SSL_VERIFYHOST
*
* 1 to check the existence of a common name in the
* SSL peer certificate. 2 to check the existence of
* a common name and also verify that it matches the hostname
* provided. 0 to not check the names. In production environments the value of this option
* should be kept at 2 (default value).
*
*
* Support for value 1 removed in cURL 7.28.1.
*
*
*
* CURLOPT_SSLVERSION
*
* One of CURL_SSLVERSION_DEFAULT (0),
* CURL_SSLVERSION_TLSv1 (1),
* CURL_SSLVERSION_SSLv2 (2),
* CURL_SSLVERSION_SSLv3 (3),
* CURL_SSLVERSION_TLSv1_0 (4),
* CURL_SSLVERSION_TLSv1_1 (5) or
* CURL_SSLVERSION_TLSv1_2 (6).
* The maximum TLS version can be set by using one of the CURL_SSLVERSION_MAX_*
* constants. It is also possible to OR one of the CURL_SSLVERSION_*
* constants with one of the CURL_SSLVERSION_MAX_* constants.
* CURL_SSLVERSION_MAX_DEFAULT (the maximum version supported by the library),
* CURL_SSLVERSION_MAX_TLSv1_0,
* CURL_SSLVERSION_MAX_TLSv1_1,
* CURL_SSLVERSION_MAX_TLSv1_2, or
* CURL_SSLVERSION_MAX_TLSv1_3.
*
*
* Your best bet is to not set this and let it use the default.
* Setting it to 2 or 3 is very dangerous given the known
* vulnerabilities in SSLv2 and SSLv3.
*
*
*
*
*
*
*
* CURLOPT_PROXY_SSL_OPTIONS
*
* Set proxy SSL behavior options, which is a bitmask of any of the following constants:
*
* CURLSSLOPT_ALLOW_BEAST: do not attempt to use
* any workarounds for a security flaw in the SSL3 and TLS1.0 protocols.
*
*
* CURLSSLOPT_NO_REVOKE: disable certificate
* revocation checks for those SSL backends where such behavior is
* present. (curl &gt;= 7.44.0)
*
*
* CURLSSLOPT_NO_PARTIALCHAIN: do not accept "partial"
* certificate chains, which it otherwise does by default. (curl &gt;= 7.68.0)
*
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_SSL_VERIFYHOST
*
* Set to 2 to verify in the HTTPS proxy's certificate name fields against the proxy name.
* When set to 0 the connection succeeds regardless of the names used in the certificate.
* Use that ability with caution!
* 1 treated as a debug option in curl 7.28.0 and earlier.
* From curl 7.28.1 to 7.65.3 CURLE_BAD_FUNCTION_ARGUMENT is returned.
* From curl 7.66.0 onwards 1 and 2 is treated as the same value.
* In production environments the value of this option should be kept at 2 (default value).
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_SSLVERSION
*
* One of CURL_SSLVERSION_DEFAULT,
* CURL_SSLVERSION_TLSv1,
* CURL_SSLVERSION_TLSv1_0,
* CURL_SSLVERSION_TLSv1_1,
* CURL_SSLVERSION_TLSv1_2,
* CURL_SSLVERSION_TLSv1_3,
* CURL_SSLVERSION_MAX_DEFAULT,
* CURL_SSLVERSION_MAX_TLSv1_0,
* CURL_SSLVERSION_MAX_TLSv1_1,
* CURL_SSLVERSION_MAX_TLSv1_2,
* CURL_SSLVERSION_MAX_TLSv1_3 or
* CURL_SSLVERSION_SSLv3.
*
*
* Your best bet is to not set this and let it use the default CURL_SSLVERSION_DEFAULT
* which will attempt to figure out the remote SSL protocol version.
*
*
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_STREAM_WEIGHT
*
* Set the numerical stream weight (a number between 1 and 256).
*
*
* Added in cURL 7.46.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_TCP_KEEPALIVE
*
* If set to 1, TCP keepalive probes will be sent. The delay and
* frequency of these probes can be controlled by the CURLOPT_TCP_KEEPIDLE
* and CURLOPT_TCP_KEEPINTVL options, provided the operating system
* supports them. If set to 0 (default) keepalive probes are disabled.
*
*
* Added in cURL 7.25.0. Available since PHP 5.5.0.
*
*
*
* CURLOPT_TCP_KEEPIDLE
*
* Sets the delay, in seconds, that the operating system will wait while the connection is
* idle before sending keepalive probes, if CURLOPT_TCP_KEEPALIVE is
* enabled. Not all operating systems support this option.
* The default is 60.
*
*
* Added in cURL 7.25.0. Available since PHP 5.5.0.
*
*
*
* CURLOPT_TCP_KEEPINTVL
*
* Sets the interval, in seconds, that the operating system will wait between sending
* keepalive probes, if CURLOPT_TCP_KEEPALIVE is enabled.
* Not all operating systems support this option.
* The default is 60.
*
*
* Added in cURL 7.25.0. Available since PHP 5.5.0.
*
*
*
* CURLOPT_TIMECONDITION
*
* How CURLOPT_TIMEVALUE is treated.
* Use CURL_TIMECOND_IFMODSINCE to return the
* page only if it has been modified since the time specified in
* CURLOPT_TIMEVALUE. If it hasn't been modified,
* a "304 Not Modified" header will be returned
* assuming CURLOPT_HEADER is TRUE.
* Use CURL_TIMECOND_IFUNMODSINCE for the reverse
* effect. CURL_TIMECOND_IFMODSINCE is the
* default.
*
*
*
*
*
* CURLOPT_TIMEOUT
*
* The maximum number of seconds to allow cURL functions to execute.
*
*
*
*
*
* CURLOPT_TIMEOUT_MS
*
* The maximum number of milliseconds to allow cURL functions to
* execute.
*
* If libcurl is built to use the standard system name resolver, that
* portion of the connect will still use full-second resolution for
* timeouts with a minimum timeout allowed of one second.
*
*
* Added in cURL 7.16.2. Available since PHP 5.2.3.
*
*
*
* CURLOPT_TIMEVALUE
*
* The time in seconds since January 1st, 1970. The time will be used
* by CURLOPT_TIMECONDITION. By default,
* CURL_TIMECOND_IFMODSINCE is used.
*
*
*
*
*
* CURLOPT_TIMEVALUE_LARGE
*
* The time in seconds since January 1st, 1970. The time will be used
* by CURLOPT_TIMECONDITION. Defaults to zero.
* The difference between this option and CURLOPT_TIMEVALUE
* is the type of the argument. On systems where 'long' is only 32 bit wide,
* this option has to be used to set dates beyond the year 2038.
*
*
* Added in cURL 7.59.0. Available since PHP 7.3.0.
*
*
*
* CURLOPT_MAX_RECV_SPEED_LARGE
*
* If a download exceeds this speed (counted in bytes per second) on
* cumulative average during the transfer, the transfer will pause to
* keep the average rate less than or equal to the parameter value.
* Defaults to unlimited speed.
*
*
* Added in cURL 7.15.5. Available since PHP 5.4.0.
*
*
*
* CURLOPT_MAX_SEND_SPEED_LARGE
*
* If an upload exceeds this speed (counted in bytes per second) on
* cumulative average during the transfer, the transfer will pause to
* keep the average rate less than or equal to the parameter value.
* Defaults to unlimited speed.
*
*
* Added in cURL 7.15.5. Available since PHP 5.4.0.
*
*
*
* CURLOPT_SSH_AUTH_TYPES
*
* A bitmask consisting of one or more of
* CURLSSH_AUTH_PUBLICKEY,
* CURLSSH_AUTH_PASSWORD,
* CURLSSH_AUTH_HOST,
* CURLSSH_AUTH_KEYBOARD. Set to
* CURLSSH_AUTH_ANY to let libcurl pick one.
*
*
* Added in cURL 7.16.1.
*
*
*
* CURLOPT_IPRESOLVE
*
* Allows an application to select what kind of IP addresses to use when
* resolving host names. This is only interesting when using host names that
* resolve addresses using more than one version of IP, possible values are
* CURL_IPRESOLVE_WHATEVER,
* CURL_IPRESOLVE_V4,
* CURL_IPRESOLVE_V6, by default
* CURL_IPRESOLVE_WHATEVER.
*
*
* Added in cURL 7.10.8.
*
*
*
* CURLOPT_FTP_FILEMETHOD
*
* Tell curl which method to use to reach a file on a FTP(S) server. Possible values are
* CURLFTPMETHOD_MULTICWD,
* CURLFTPMETHOD_NOCWD and
* CURLFTPMETHOD_SINGLECWD.
*
*
* Added in cURL 7.15.1. Available since PHP 5.3.0.
*
*
*
*
*
*
* This option is deprecated, as it was never implemented in cURL and
* never had any effect.
*
* The HTTP authentication method(s) to use. The options are:
* CURLAUTH_BASIC,
* CURLAUTH_DIGEST,
* CURLAUTH_GSSNEGOTIATE,
* CURLAUTH_NTLM,
* CURLAUTH_ANY, and
* CURLAUTH_ANYSAFE.
*
* The bitwise | (or) operator can be used to combine
* more than one method. If this is done, cURL will poll the server to see
* what methods it supports and pick the best one.
*
* CURLAUTH_ANY is an alias for
* CURLAUTH_BASIC | CURLAUTH_DIGEST | CURLAUTH_GSSNEGOTIATE | CURLAUTH_NTLM.
*
* CURLAUTH_ANYSAFE is an alias for
* CURLAUTH_DIGEST | CURLAUTH_GSSNEGOTIATE | CURLAUTH_NTLM.
*
* Bitmask of CURLPROTO_* values. If used, this bitmask
* limits what protocols libcurl may use in the transfer. This allows you to have
* a libcurl built to support a wide range of protocols but still limit specific
* transfers to only be allowed to use a subset of them. By default libcurl will
* accept all protocols it supports.
* See also CURLOPT_REDIR_PROTOCOLS.
*
* Valid protocol options are:
* CURLPROTO_HTTP,
* CURLPROTO_HTTPS,
* CURLPROTO_FTP,
* CURLPROTO_FTPS,
* CURLPROTO_SCP,
* CURLPROTO_SFTP,
* CURLPROTO_TELNET,
* CURLPROTO_LDAP,
* CURLPROTO_LDAPS,
* CURLPROTO_DICT,
* CURLPROTO_FILE,
* CURLPROTO_TFTP,
* CURLPROTO_ALL
*
* The SOCKS5 authentication method(s) to use. The options are:
* CURLAUTH_BASIC,
* CURLAUTH_GSSAPI,
* CURLAUTH_NONE.
*
* The bitwise | (or) operator can be used to combine
* more than one method. If this is done, cURL will poll the server to see
* what methods it supports and pick the best one.
*
* CURLAUTH_BASIC allows username/password authentication.
*
* CURLAUTH_GSSAPI allows GSS-API authentication.
*
* CURLAUTH_NONE allows no authentication.
*
* Defaults to CURLAUTH_BASIC|CURLAUTH_GSSAPI.
* Set the actual username and password with the CURLOPT_PROXYUSERPWD option.
*
* Your best bet is to not set this and let it use the default.
* Setting it to 2 or 3 is very dangerous given the known
* vulnerabilities in SSLv2 and SSLv3.
*
* Your best bet is to not set this and let it use the default CURL_SSLVERSION_DEFAULT
* which will attempt to figure out the remote SSL protocol version.
*
* value should be a string for the
* following values of the option parameter:
*
*
*
*
* Option
* Set value to
* Notes
*
*
*
*
* CURLOPT_ABSTRACT_UNIX_SOCKET
*
* Enables the use of an abstract Unix domain socket instead of
* establishing a TCP connection to a host and sets the path to
* the given string. This option shares the same semantics
* as CURLOPT_UNIX_SOCKET_PATH. These two options
* share the same storage and therefore only one of them can be set
* per handle.
*
*
* Available since PHP 7.3.0 and cURL 7.53.0
*
*
*
* CURLOPT_CAINFO
*
* The name of a file holding one or more certificates to verify the
* peer with. This only makes sense when used in combination with
* CURLOPT_SSL_VERIFYPEER.
*
*
* Might require an absolute path.
*
*
*
* CURLOPT_CAPATH
*
* A directory that holds multiple CA certificates. Use this option
* alongside CURLOPT_SSL_VERIFYPEER.
*
*
*
*
*
* CURLOPT_COOKIE
*
* The contents of the "Cookie: " header to be
* used in the HTTP request.
* Note that multiple cookies are separated with a semicolon followed
* by a space (e.g., "fruit=apple; colour=red")
*
*
*
*
*
* CURLOPT_COOKIEFILE
*
* The name of the file containing the cookie data. The cookie file can
* be in Netscape format, or just plain HTTP-style headers dumped into
* a file.
* If the name is an empty string, no cookies are loaded, but cookie
* handling is still enabled.
*
*
*
*
*
* CURLOPT_COOKIEJAR
*
* The name of a file to save all internal cookies to when the handle is closed,
* e.g. after a call to curl_close.
*
*
*
*
*
* CURLOPT_COOKIELIST
*
* A cookie string (i.e. a single line in Netscape/Mozilla format, or a regular
* HTTP-style Set-Cookie header) adds that single cookie to the internal cookie store.
* "ALL" erases all cookies held in memory.
* "SESS" erases all session cookies held in memory.
* "FLUSH" writes all known cookies to the file specified by CURLOPT_COOKIEJAR.
* "RELOAD" loads all cookies from the files specified by CURLOPT_COOKIEFILE.
*
*
* Available since PHP 5.5.0 and cURL 7.14.1.
*
*
*
* CURLOPT_CUSTOMREQUEST
*
* A custom request method to use instead of
* "GET" or "HEAD" when doing
* a HTTP request. This is useful for doing
* "DELETE" or other, more obscure HTTP requests.
* Valid values are things like "GET",
* "POST", "CONNECT" and so on;
* i.e. Do not enter a whole HTTP request line here. For instance,
* entering "GET /index.html HTTP/1.0\r\n\r\n"
* would be incorrect.
*
*
* Don't do this without making sure the server supports the custom
* request method first.
*
*
*
*
*
*
*
* CURLOPT_DEFAULT_PROTOCOL
*
* The default protocol to use if the URL is missing a scheme name.
*
*
* Added in cURL 7.45.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_DNS_INTERFACE
*
* Set the name of the network interface that the DNS resolver should bind to.
* This must be an interface name (not an address).
*
*
* Added in cURL 7.33.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_DNS_LOCAL_IP4
*
* Set the local IPv4 address that the resolver should bind to. The argument
* should contain a single numerical IPv4 address as a string.
*
*
* Added in cURL 7.33.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_DNS_LOCAL_IP6
*
* Set the local IPv6 address that the resolver should bind to. The argument
* should contain a single numerical IPv6 address as a string.
*
*
* Added in cURL 7.33.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_EGDSOCKET
*
* Like CURLOPT_RANDOM_FILE, except a filename
* to an Entropy Gathering Daemon socket.
*
*
*
*
*
* CURLOPT_ENCODING
*
* The contents of the "Accept-Encoding: " header.
* This enables decoding of the response. Supported encodings are
* "identity", "deflate", and
* "gzip". If an empty string, "",
* is set, a header containing all supported encoding types is sent.
*
*
* Added in cURL 7.10.
*
*
*
* CURLOPT_FTPPORT
*
* The value which will be used to get the IP address to use
* for the FTP "PORT" instruction. The "PORT" instruction tells
* the remote server to connect to our specified IP address. The
* string may be a plain IP address, a hostname, a network
* interface name (under Unix), or just a plain '-' to use the
* systems default IP address.
*
*
*
*
*
* CURLOPT_INTERFACE
*
* The name of the outgoing network interface to use. This can be an
* interface name, an IP address or a host name.
*
*
*
*
*
* CURLOPT_KEYPASSWD
*
* The password required to use the CURLOPT_SSLKEY
* or CURLOPT_SSH_PRIVATE_KEYFILE private key.
*
*
* Added in cURL 7.16.1.
*
*
*
* CURLOPT_KRB4LEVEL
*
* The KRB4 (Kerberos 4) security level. Any of the following values
* (in order from least to most powerful) are valid:
* "clear",
* "safe",
* "confidential",
* "private"..
* If the string does not match one of these,
* "private" is used. Setting this option to NULL
* will disable KRB4 security. Currently KRB4 security only works
* with FTP transactions.
*
*
*
*
*
* CURLOPT_LOGIN_OPTIONS
*
* Can be used to set protocol specific login options, such as the
* preferred authentication mechanism via "AUTH=NTLM" or "AUTH=*",
* and should be used in conjunction with the
* CURLOPT_USERNAME option.
*
*
* Added in cURL 7.34.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_PINNEDPUBLICKEY
*
* Set the pinned public key.
* The string can be the file name of your pinned public key. The file
* format expected is "PEM" or "DER". The string can also be any
* number of base64 encoded sha256 hashes preceded by "sha256//" and
* separated by ";".
*
*
* Added in cURL 7.39.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_POSTFIELDS
*
*
* The full data to post in a HTTP "POST" operation.
* To post a file, prepend a filename with @ and
* use the full path. The filetype can be explicitly specified by
* following the filename with the type in the format
* ';type=mimetype'. This parameter can either be
* passed as a urlencoded string like 'para1=val1&amp;para2=val2&amp;...'
* or as an array with the field name as key and field data as value.
* If value is an array, the
* Content-Type header will be set to
* multipart/form-data.
*
*
* As of PHP 5.2.0, value must be an array if
* files are passed to this option with the @ prefix.
*
*
* As of PHP 5.5.0, the @ prefix is deprecated and
* files can be sent using CURLFile. The
* @ prefix can be disabled for safe passing of
* values beginning with @ by setting the
* CURLOPT_SAFE_UPLOAD option to TRUE.
*
*
*
*
*
*
* CURLOPT_PRIVATE
*
* Any data that should be associated with this cURL handle. This data
* can subsequently be retrieved with the
* CURLINFO_PRIVATE option of
* curl_getinfo. cURL does nothing with this data.
* When using a cURL multi handle, this private data is typically a
* unique key to identify a standard cURL handle.
*
*
* Added in cURL 7.10.3.
*
*
*
* CURLOPT_PRE_PROXY
*
* Set a string holding the host name or dotted numerical
* IP address to be used as the preproxy that curl connects to before
* it connects to the HTTP(S) proxy specified in the
* CURLOPT_PROXY option for the upcoming request.
* The preproxy can only be a SOCKS proxy and it should be prefixed with
* [scheme]:// to specify which kind of socks is used.
* A numerical IPv6 address must be written within [brackets].
* Setting the preproxy to an empty string explicitly disables the use of a preproxy.
* To specify port number in this string, append :[port]
* to the end of the host name. The proxy's port number may optionally be
* specified with the separate option CURLOPT_PROXYPORT.
* Defaults to using port 1080 for proxies if a port is not specified.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY
*
* The HTTP proxy to tunnel requests through.
*
*
*
*
*
* CURLOPT_PROXY_SERVICE_NAME
*
* The proxy authentication service name.
*
*
* Added in cURL 7.34.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_PROXY_CAINFO
*
* The path to proxy Certificate Authority (CA) bundle. Set the path as a
* string naming a file holding one or more certificates to
* verify the HTTPS proxy with.
* This option is for connecting to an HTTPS proxy, not an HTTPS server.
* Defaults set to the system path where libcurl's cacert bundle is assumed
* to be stored.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_CAPATH
*
* The directory holding multiple CA certificates to verify the HTTPS proxy with.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_CRLFILE
*
* Set the file name with the concatenation of CRL (Certificate Revocation List)
* in PEM format to use in the certificate validation that occurs during
* the SSL exchange.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_KEYPASSWD
*
* Set the string be used as the password required to use the
* CURLOPT_PROXY_SSLKEY private key. You never needed a
* passphrase to load a certificate but you need one to load your private key.
* This option is for connecting to an HTTPS proxy, not an HTTPS server.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_PINNEDPUBLICKEY
*
* Set the pinned public key for HTTPS proxy. The string can be the file name
* of your pinned public key. The file format expected is "PEM" or "DER".
* The string can also be any number of base64 encoded sha256 hashes preceded by
* "sha256//" and separated by ";"
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_SSLCERT
*
* The file name of your client certificate used to connect to the HTTPS proxy.
* The default format is "P12" on Secure Transport and "PEM" on other engines,
* and can be changed with CURLOPT_PROXY_SSLCERTTYPE.
* With NSS or Secure Transport, this can also be the nickname of the certificate
* you wish to authenticate with as it is named in the security database.
* If you want to use a file from the current directory, please precede it with
* "./" prefix, in order to avoid confusion with a nickname.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_SSLCERTTYPE
*
* The format of your client certificate used when connecting to an HTTPS proxy.
* Supported formats are "PEM" and "DER", except with Secure Transport.
* OpenSSL (versions 0.9.3 and later) and Secure Transport
* (on iOS 5 or later, or OS X 10.7 or later) also support "P12" for
* PKCS#12-encoded files. Defaults to "PEM".
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_SSL_CIPHER_LIST
*
* The list of ciphers to use for the connection to the HTTPS proxy.
* The list must be syntactically correct, it consists of one or more cipher
* strings separated by colons. Commas or spaces are also acceptable separators
* but colons are normally used, !, - and + can be used as operators.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_TLS13_CIPHERS
*
* The list of cipher suites to use for the TLS 1.3 connection to a proxy.
* The list must be syntactically correct, it consists of one or more
* cipher suite strings separated by colons. This option is currently used
* only when curl is built to use OpenSSL 1.1.1 or later.
* If you are using a different SSL backend you can try setting
* TLS 1.3 cipher suites by using the CURLOPT_PROXY_SSL_CIPHER_LIST option.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.61.0. Available when built with OpenSSL &gt;= 1.1.1.
*
*
*
* CURLOPT_PROXY_SSLKEY
*
* The file name of your private key used for connecting to the HTTPS proxy.
* The default format is "PEM" and can be changed with
* CURLOPT_PROXY_SSLKEYTYPE.
* (iOS and Mac OS X only) This option is ignored if curl was built against Secure Transport.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0. Available if built TLS enabled.
*
*
*
* CURLOPT_PROXY_SSLKEYTYPE
*
* The format of your private key. Supported formats are "PEM", "DER" and "ENG".
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_TLSAUTH_PASSWORD
*
* The password to use for the TLS authentication method specified with the
* CURLOPT_PROXY_TLSAUTH_TYPE option. Requires that the
* CURLOPT_PROXY_TLSAUTH_USERNAME option to also be set.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_TLSAUTH_TYPE
*
* The method of the TLS authentication used for the HTTPS connection. Supported method is "SRP".
*
*
* Secure Remote Password (SRP) authentication for TLS provides mutual authentication
* if both sides have a shared secret. To use TLS-SRP, you must also set the
* CURLOPT_PROXY_TLSAUTH_USERNAME and
* CURLOPT_PROXY_TLSAUTH_PASSWORD options.
*
*
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXY_TLSAUTH_USERNAME
*
* Tusername to use for the HTTPS proxy TLS authentication method specified with the
* CURLOPT_PROXY_TLSAUTH_TYPE option. Requires that the
* CURLOPT_PROXY_TLSAUTH_PASSWORD option to also be set.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.52.0.
*
*
*
* CURLOPT_PROXYUSERPWD
*
* A username and password formatted as
* "[username]:[password]" to use for the
* connection to the proxy.
*
*
*
*
*
* CURLOPT_RANDOM_FILE
*
* A filename to be used to seed the random number generator for SSL.
*
*
*
*
*
* CURLOPT_RANGE
*
* Range(s) of data to retrieve in the format
* "X-Y" where X or Y are optional. HTTP transfers
* also support several intervals, separated with commas in the format
* "X-Y,N-M".
*
*
*
*
*
* CURLOPT_REFERER
*
* The contents of the "Referer: " header to be used
* in a HTTP request.
*
*
*
*
*
* CURLOPT_SERVICE_NAME
*
* The authentication service name.
*
*
* Added in cURL 7.43.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_SSH_HOST_PUBLIC_KEY_MD5
*
* A string containing 32 hexadecimal digits. The string should be the
* MD5 checksum of the remote host's public key, and libcurl will reject
* the connection to the host unless the md5sums match.
* This option is only for SCP and SFTP transfers.
*
*
* Added in cURL 7.17.1.
*
*
*
* CURLOPT_SSH_PUBLIC_KEYFILE
*
* The file name for your public key. If not used, libcurl defaults to
* $HOME/.ssh/id_dsa.pub if the HOME environment variable is set,
* and just "id_dsa.pub" in the current directory if HOME is not set.
*
*
* Added in cURL 7.16.1.
*
*
*
* CURLOPT_SSH_PRIVATE_KEYFILE
*
* The file name for your private key. If not used, libcurl defaults to
* $HOME/.ssh/id_dsa if the HOME environment variable is set,
* and just "id_dsa" in the current directory if HOME is not set.
* If the file is password-protected, set the password with
* CURLOPT_KEYPASSWD.
*
*
* Added in cURL 7.16.1.
*
*
*
* CURLOPT_SSL_CIPHER_LIST
*
* A list of ciphers to use for SSL. For example,
* RC4-SHA and TLSv1 are valid
* cipher lists.
*
*
*
*
*
* CURLOPT_SSLCERT
*
* The name of a file containing a PEM formatted certificate.
*
*
*
*
*
* CURLOPT_SSLCERTPASSWD
*
* The password required to use the
* CURLOPT_SSLCERT certificate.
*
*
*
*
*
* CURLOPT_SSLCERTTYPE
*
* The format of the certificate. Supported formats are
* "PEM" (default), "DER",
* and "ENG".
* As of OpenSSL 0.9.3, "P12" (for PKCS#12-encoded files)
* is also supported.
*
*
* Added in cURL 7.9.3.
*
*
*
* CURLOPT_SSLENGINE
*
* The identifier for the crypto engine of the private SSL key
* specified in CURLOPT_SSLKEY.
*
*
*
*
*
* CURLOPT_SSLENGINE_DEFAULT
*
* The identifier for the crypto engine used for asymmetric crypto
* operations.
*
*
*
*
*
* CURLOPT_SSLKEY
*
* The name of a file containing a private SSL key.
*
*
*
*
*
* CURLOPT_SSLKEYPASSWD
*
* The secret password needed to use the private SSL key specified in
* CURLOPT_SSLKEY.
*
*
* Since this option contains a sensitive password, remember to keep
* the PHP script it is contained within safe.
*
*
*
*
*
*
*
* CURLOPT_SSLKEYTYPE
*
* The key type of the private SSL key specified in
* CURLOPT_SSLKEY. Supported key types are
* "PEM" (default), "DER",
* and "ENG".
*
*
*
*
*
* CURLOPT_TLS13_CIPHERS
*
* The list of cipher suites to use for the TLS 1.3 connection. The list must be
* syntactically correct, it consists of one or more cipher suite strings separated by colons.
* This option is currently used only when curl is built to use OpenSSL 1.1.1 or later.
* If you are using a different SSL backend you can try setting
* TLS 1.3 cipher suites by using the CURLOPT_SSL_CIPHER_LIST option.
*
*
* Available since PHP 7.3.0 and libcurl &gt;= cURL 7.61.0. Available when built with OpenSSL &gt;= 1.1.1.
*
*
*
* CURLOPT_UNIX_SOCKET_PATH
*
* Enables the use of Unix domain sockets as connection endpoint and
* sets the path to the given string.
*
*
* Added in cURL 7.40.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_URL
*
* The URL to fetch. This can also be set when initializing a
* session with curl_init.
*
*
*
*
*
* CURLOPT_USERAGENT
*
* The contents of the "User-Agent: " header to be
* used in a HTTP request.
*
*
*
*
*
* CURLOPT_USERNAME
*
* The user name to use in authentication.
*
*
* Added in cURL 7.19.1. Available since PHP 5.5.0.
*
*
*
* CURLOPT_USERPWD
*
* A username and password formatted as
* "[username]:[password]" to use for the
* connection.
*
*
*
*
*
* CURLOPT_XOAUTH2_BEARER
*
* Specifies the OAuth 2.0 access token.
*
*
* Added in cURL 7.33.0. Available since PHP 7.0.7.
*
*
*
*
*
*
* A custom request method to use instead of
* "GET" or "HEAD" when doing
* a HTTP request. This is useful for doing
* "DELETE" or other, more obscure HTTP requests.
* Valid values are things like "GET",
* "POST", "CONNECT" and so on;
* i.e. Do not enter a whole HTTP request line here. For instance,
* entering "GET /index.html HTTP/1.0\r\n\r\n"
* would be incorrect.
*
*
* Don't do this without making sure the server supports the custom
* request method first.
*
*
*
* Don't do this without making sure the server supports the custom
* request method first.
*
* The default protocol to use if the URL is missing a scheme name.
*
* Set the name of the network interface that the DNS resolver should bind to.
* This must be an interface name (not an address).
*
* Set the local IPv4 address that the resolver should bind to. The argument
* should contain a single numerical IPv4 address as a string.
*
* Set the local IPv6 address that the resolver should bind to. The argument
* should contain a single numerical IPv6 address as a string.
*
* Secure Remote Password (SRP) authentication for TLS provides mutual authentication
* if both sides have a shared secret. To use TLS-SRP, you must also set the
* CURLOPT_PROXY_TLSAUTH_USERNAME and
* CURLOPT_PROXY_TLSAUTH_PASSWORD options.
*
* The secret password needed to use the private SSL key specified in
* CURLOPT_SSLKEY.
*
*
* Since this option contains a sensitive password, remember to keep
* the PHP script it is contained within safe.
*
*
*
* Since this option contains a sensitive password, remember to keep
* the PHP script it is contained within safe.
*
* value should be an array for the
* following values of the option parameter:
*
*
*
*
* Option
* Set value to
* Notes
*
*
*
*
* CURLOPT_CONNECT_TO
*
* Connect to a specific host and port instead of the URL's host and port.
* Accepts an array of strings with the format
* HOST:PORT:CONNECT-TO-HOST:CONNECT-TO-PORT.
*
*
* Added in cURL 7.49.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_HTTP200ALIASES
*
* An array of HTTP 200 responses that will be treated as valid
* responses and not as errors.
*
*
* Added in cURL 7.10.3.
*
*
*
* CURLOPT_HTTPHEADER
*
* An array of HTTP header fields to set, in the format
*
* array('Content-type: text/plain', 'Content-length: 100')
*
*
*
*
*
*
* CURLOPT_POSTQUOTE
*
* An array of FTP commands to execute on the server after the FTP
* request has been performed.
*
*
*
*
*
* CURLOPT_PROXYHEADER
*
* An array of custom HTTP headers to pass to proxies.
*
*
* Added in cURL 7.37.0. Available since PHP 7.0.7.
*
*
*
* CURLOPT_QUOTE
*
* An array of FTP commands to execute on the server prior to the FTP
* request.
*
*
*
*
*
* CURLOPT_RESOLVE
*
* Provide a custom address for a specific host and port pair. An array
* of hostname, port, and IP address strings, each element separated by
* a colon. In the format:
*
* array("example.com:80:127.0.0.1")
*
*
*
* Added in cURL 7.21.3. Available since PHP 5.5.0.
*
*
*
*
*
*
* value should be a stream resource (using
* fopen, for example) for the following values of the
* option parameter:
*
*
*
*
* Option
* Set value to
*
*
*
*
* CURLOPT_FILE
*
* The file that the transfer should be written to. The default
* is STDOUT (the browser window).
*
*
*
* CURLOPT_INFILE
*
* The file that the transfer should be read from when uploading.
*
*
*
* CURLOPT_STDERR
*
* An alternative location to output errors to instead of
* STDERR.
*
*
*
* CURLOPT_WRITEHEADER
*
* The file that the header part of the transfer is written to.
*
*
*
*
*
*
* value should be the name of a valid function or a Closure
* for the following values of the option parameter:
*
*
*
*
* Option
* Set value to
*
*
*
*
* CURLOPT_HEADERFUNCTION
*
* A callback accepting two parameters.
* The first is the cURL resource, the second is a
* string with the header data to be written. The header data must
* be written by this callback. Return the number of
* bytes written.
*
*
*
* CURLOPT_PASSWDFUNCTION
*
* A callback accepting three parameters.
* The first is the cURL resource, the second is a
* string containing a password prompt, and the third is the maximum
* password length. Return the string containing the password.
*
*
*
* CURLOPT_PROGRESSFUNCTION
*
*
* A callback accepting five parameters.
* The first is the cURL resource, the second is the total number of
* bytes expected to be downloaded in this transfer, the third is
* the number of bytes downloaded so far, the fourth is the total
* number of bytes expected to be uploaded in this transfer, and the
* fifth is the number of bytes uploaded so far.
*
*
*
* The callback is only called when the CURLOPT_NOPROGRESS
* option is set to FALSE.
*
*
*
* Return a non-zero value to abort the transfer. In which case, the
* transfer will set a CURLE_ABORTED_BY_CALLBACK
* error.
*
*
*
*
* CURLOPT_READFUNCTION
*
* A callback accepting three parameters.
* The first is the cURL resource, the second is a
* stream resource provided to cURL through the option
* CURLOPT_INFILE, and the third is the maximum
* amount of data to be read. The callback must return a string
* with a length equal or smaller than the amount of data requested,
* typically by reading it from the passed stream resource. It should
* return an empty string to signal EOF.
*
*
*
* CURLOPT_WRITEFUNCTION
*
* A callback accepting two parameters.
* The first is the cURL resource, and the second is a
* string with the data to be written. The data must be saved by
* this callback. It must return the exact number of bytes written
* or the transfer will be aborted with an error.
*
*
*
*
*
*
* A callback accepting five parameters.
* The first is the cURL resource, the second is the total number of
* bytes expected to be downloaded in this transfer, the third is
* the number of bytes downloaded so far, the fourth is the total
* number of bytes expected to be uploaded in this transfer, and the
* fifth is the number of bytes uploaded so far.
*
* The callback is only called when the CURLOPT_NOPROGRESS
* option is set to FALSE.
*
* Return a non-zero value to abort the transfer. In which case, the
* transfer will set a CURLE_ABORTED_BY_CALLBACK
* error.
*
* Other values:
*
*
*
*
* Option
* Set value to
*
*
*
*
* CURLOPT_SHARE
*
* A result of curl_share_init. Makes the cURL
* handle to use the data from the shared handle.
*
*
*
*
*
* @throws CurlException
*
*/
function curl_setopt($ch, int $option, $value): void
{
error_clear_last();
$result = \curl_setopt($ch, $option, $value);
if ($result === false) {
throw CurlException::createFromCurlResource($ch);
}
}
/**
* Return an integer containing the last share curl error number.
*
* @param resource $sh A cURL share handle returned by curl_share_init.
* @return int Returns an integer containing the last share curl error number.
* @throws CurlException
*
*/
function curl_share_errno($sh): int
{
error_clear_last();
$result = \curl_share_errno($sh);
if ($result === false) {
throw CurlException::createFromPhpError();
}
return $result;
}
/**
* Sets an option on the given cURL share handle.
*
* @param resource $sh A cURL share handle returned by curl_share_init.
* @param int $option
*
*
*
* Option
* Description
*
*
*
*
* CURLSHOPT_SHARE
*
* Specifies a type of data that should be shared.
*
*
*
* CURLSHOPT_UNSHARE
*
* Specifies a type of data that will be no longer shared.
*
*
*
*
*
* @param string $value
*
*
*
* Value
* Description
*
*
*
*
* CURL_LOCK_DATA_COOKIE
*
* Shares cookie data.
*
*
*
* CURL_LOCK_DATA_DNS
*
* Shares DNS cache. Note that when you use cURL multi handles,
* all handles added to the same multi handle will share DNS cache
* by default.
*
*
*
* CURL_LOCK_DATA_SSL_SESSION
*
* Shares SSL session IDs, reducing the time spent on the SSL
* handshake when reconnecting to the same server. Note that SSL
* session IDs are reused within the same handle by default.
*
*
*
*
*
* @throws CurlException
*
*/
function curl_share_setopt($sh, int $option, string $value): void
{
error_clear_last();
$result = \curl_share_setopt($sh, $option, $value);
if ($result === false) {
throw CurlException::createFromPhpError();
}
}
/**
* This function decodes the given URL encoded string.
*
* @param resource $ch A cURL handle returned by
* curl_init.
* @param string $str The URL encoded string to be decoded.
* @return string Returns decoded string.
* @throws CurlException
*
*/
function curl_unescape($ch, string $str): string
{
error_clear_last();
$result = \curl_unescape($ch, $str);
if ($result === false) {
throw CurlException::createFromCurlResource($ch);
}
return $result;
}