cc-ci-orchestrator/archive/nix/configuration-incus-vm.nix

# ⚠️ HISTORICAL / DEAD CONFIG — DO NOT DEPLOY. (superseded 2026-05-31)
# This is the OLD Incus VM (`cc-ci-orchestrator`, tailnet 100.116.55.106) config. The orchestrator
# now runs on Hetzner — the LIVE config is nix/hosts/cc-ci-orchestrator-hetzner/configuration.nix.
# Kept only for historical comparison; it runs loops as root and hard-codes the dead cc-ci IP.
# Delete once the old Incus VM is torn down.
#
# cc-ci-orchestrator VM — NixOS config (channel-based: nixos-24.11; deployed to /etc/nixos/configuration.nix)
#
# Purpose: a reboot-resilient host for the cc-ci Builder/Adversary loops + watchdog + the orchestrator
# session, moved off the unstable 905 MiB Pi. See plan-orchestrator-migration.md.
#
# STATUS: DRAFT (Phase B). The nix-ld + claude-install bits need on-VM validation (the standalone
# Claude Code is a Bun ELF binary; NixOS needs nix-ld to run a foreign dynamic binary). The
# cc-ci-loops supervisor service is defined but NOT enabled until the workspace is staged (Phase C/D).
{ config, pkgs, lib, modulesPath, ... }:
{
  imports = [
    "${modulesPath}/virtualisation/incus-virtual-machine.nix"
  ];

  # --- base (mirrors the incus-base-vm) ---
  virtualisation.incus.agent.enable = true;            # for `incus exec`
  services.cloud-init = { enable = true; network.enable = true; };
  services.openssh = { enable = true; settings.PermitRootLogin = "yes"; };
  networking.useDHCP = true;
  networking.nameservers = [ "1.1.1.1" "8.8.8.8" ];
  networking.firewall = { enable = true; trustedInterfaces = [ "tailscale0" ]; allowedTCPPorts = [ 22 ]; };
  nix.settings.experimental-features = [ "nix-command" "flakes" ];
  system.stateVersion = "24.11";

  # --- tailscale (auto-auth from /etc/ts-auth-key, hostname from /etc/ts-hostname; written by cloud-init) ---
  services.tailscale = {
    enable = true;
    authKeyFile = "/etc/ts-auth-key";
    extraUpFlags = let h = lib.strings.removeSuffix "\n" (builtins.readFile /etc/ts-hostname);
                   in [ "--hostname=${h}" "--ssh" ];   # --ssh: allow tailscale-ssh as a fallback path
  };

  # --- swap: the Pi OOM lesson. 2 GB RAM is tight for 3 concurrent claude sessions; 4 GB disk swap
  #     as a real overflow tier (zram is in-RAM and doesn't add capacity). ---
  swapDevices = [ { device = "/swapfile"; size = 4096; } ];

  # --- nix-ld: lets the standalone Claude Code (foreign dynamic ELF / Bun) run on NixOS ---
  programs.nix-ld.enable = true;
  programs.nix-ld.libraries = with pkgs; [
    stdenv.cc.cc.lib   # libstdc++ / libgcc_s
    zlib
    openssl
    curl
    glibc
  ];

  # --- packages the loops + launch.sh + orchestrator need ---
  environment.systemPackages = with pkgs; [
    git tmux python3 jq curl cacert
    gnused gawk coreutils gnugrep findutils util-linux
    nettools openssh        # nc, ssh
    docker-client           # `docker` CLI is not needed (deploys run on cc-ci), but handy for probes
  ];

  # --- loops user: non-root account for running claude (--dangerously-skip-permissions blocked for root) ---
  users.users.loops = {
    isNormalUser = true;
    home = "/home/loops";
    shell = pkgs.bash;
    extraGroups = [ "wheel" ];          # sudo access
  };
  security.sudo.wheelNeedsPassword = false;   # passwordless sudo for wheel
  # Allow loops user to use tmux/claude without a password prompt
  security.sudo.extraRules = [{
    users = [ "loops" ];
    commands = [{ command = "ALL"; options = [ "NOPASSWD" ]; }];
  }];

  # --- root PATH: ensure ~/.local/bin (where the standalone claude binary lives) is on root's PATH ---
  environment.variables.PATH = lib.mkForce "/root/.local/bin:/run/current-system/sw/bin:/run/wrappers/bin:/usr/bin:/bin";

  # --- root ssh config: reach cc-ci DIRECTLY over the VM's own tailscale (this VM is a tailnet peer,
  #     so NO SOCKS proxy is needed — unlike the Pi). Key staged at /root/.ssh/cc-ci-root-ed25519. ---
  system.activationScripts.ccciSshConfig = ''
    mkdir -p /root/.ssh && chmod 700 /root/.ssh
    cat > /root/.ssh/config <<'SSHCFG'
    Host cc-ci cc-nix-test 100.90.116.4
        HostName 100.90.116.4
        User root
        IdentityFile /root/.ssh/cc-ci-root-ed25519
        IdentitiesOnly yes
        StrictHostKeyChecking accept-new
        ServerAliveInterval 30
    SSHCFG
    chmod 600 /root/.ssh/config
  '';

  # --- claude-install: idempotent oneshot — fetch the standalone Claude Code CLI if missing.
  #     Runs via nix-ld. (Auth is a one-time operator step: `claude auth login` — see migration plan.) ---
  systemd.services.claude-install = {
    description = "Install the standalone Claude Code CLI if missing (idempotent)";
    wantedBy = [ "multi-user.target" ];
    after = [ "network-online.target" "nix-ld.service" ];
    wants = [ "network-online.target" ];
    serviceConfig = { Type = "oneshot"; RemainAfterExit = true; };
    path = [ pkgs.curl pkgs.bash pkgs.coreutils pkgs.gnutar pkgs.gzip pkgs.unzip ];
    script = ''
      if [ ! -x /root/.local/bin/claude ]; then
        echo "installing standalone Claude Code CLI..."
        curl -fsSL https://claude.ai/install.sh | bash || echo "claude install failed (retry next activation)"
      fi
    '';
  };

  # --- cc-ci-loops supervisor (DEFINED, NOT YET ENABLED). Enabled in Phase D after the workspace
  #     (/srv/cc-ci: launch.sh, plan, prompts, the loop clones, secrets) is staged. This is the
  #     reboot-resilience fix: it runs launch.sh start on every boot. Mirrors the Pi's cc-ci-loops.service. ---
  systemd.services.cc-ci-loops = {
    description = "cc-ci Builder/Adversary loops + watchdog (launch.sh start, RESUME_PHASE)";
    wantedBy = [ "multi-user.target" ];   # enabled: workspace staged (Phase C/D 2026-05-30)
    after = [ "network-online.target" "tailscaled.service" "claude-install.service" ];
    wants = [ "network-online.target" ];
    serviceConfig = {
      Type = "oneshot"; RemainAfterExit = true; User = "root";
      WorkingDirectory = "/srv/cc-ci";
    };
    environment = { RESUME_PHASE = "1"; HOME = "/root"; };
    path = [ pkgs.bash pkgs.tmux pkgs.git pkgs.python3 pkgs.openssh pkgs.nettools ];
    script = ''
      [ -x /srv/cc-ci/cc-ci-plan/launch.sh ] && /srv/cc-ci/cc-ci-plan/launch.sh start || \
        echo "workspace not staged yet (/srv/cc-ci/cc-ci-plan/launch.sh missing) — skipping"
    '';
  };
}